Primary Purpose:
Perform duties on crew to assist Pipe layers, Carpenters, Pile Drivers, and Grade Crews in their Operations.
Typical Duties:
• Ability to drive a vehicle;
• Run errands and performs variety of tasks involving dexterous use of hand tools;
• Lifts, carries, push, pulls and holds construction materials, tools and supplies;
• Cleans and sorts tools, equipment, and materials;
• Cleans work area, parking lots, and offices as directed;
• Assist Pipe layers, Carpenters, Pile Drivers, and Grade Crews in their Operations;
• Signals operator, with hand signals, to guide operator in lifting and moving loads;
• Place concrete, fine grade dirt, stone ;
• Handle miscellaneous materials that will be delivered on trucks;
• Install/repair erosion control devices;
• Install/repair MOT Devices
• Perform duties as instructed by Foreman and/or Superintendent
Requirements:
Workers should be able to:
• Follow specific directions; perform a variety of duties which may often change; repeat tasks of short duration according to a set procedure; evaluate information using measurable standards.
Physically, workers must be able to:
• Stand or walk for long periods; use arms and hands to reach for, handle, and manipulate objects; lift and carry materials weighing 50 to 100 pounds;
• Climb up and down ladders, scaffolds, and other objects and carry tools and equipment; stoop, kneel, crouch, and crawl, and see (naturally or with correction).
• Work in outdoor conditions ( Rain, Heat, Dusty environment)
The above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day.
Email Resume to -
Kosal.sarou@skanska.com
Skanska USA Civil Southeast Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity or age.
General Position Summary:
Operates friction and hydraulic diesel cranes (lattice boom, large hydraulic, small hydraulic) to handle and move products, equipment or materials on land and water.
Typical Duties:
· Pushes and pulls levers and depresses pedals to raise, lower and rotate boom and to raise and lower load line in response to signals.
· Perform and assist with routine inspections and lubrication of cables, pulleys, guides, and drums.
· May be known according to material moved or equipment controlled
Requirements:
Workers should be able to:
· Practice good safety habits
· Work in dusty or dirty surroundings
· Work in a marine environment
· Follow instructions and meet set standards
· Judge distances and slopes accurately and make decisions based on verifiable standards
· Physically workers must be able to stoop, bend and crouch, use hands, arms and legs fully, climb on and off of barges
· See well (either naturally or with correction)
· Lift up to 50 pounds with frequent lifting and carrying of objects weighing up to 25 pounds.
· Must have at least 1 year experience
· NCCCO certification is required for the specific type of crane to be operated
Preferred:
· Experience operating ringers or crawler cranes on barges in a marine setting
Email Resume to - Kosal.sarou@skanska.com
Skanska USA Civil Southeast Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity or age.
Reports To: Surveyor Superintendent, Surveyor Manager
General Positon Summary
Surveyor provides surveying services to company supervisors and craft to ensure construction work complies with all appropriate standards.
Major Duties & Responsibilities
· Responsible for the strict adherence to company safety policies and programs through the communication and enforcement of the Skanska Safety and Health Management Program, including the ability to independently stop work for a safety violation or suspected safety violation
· Ability to perform all roadway and bridge layout and a full understanding of agency standards and specifications
· Ability to run and reduce horizontal and vertical controls for the project
· Perf calculations for vertical and horizontal layout
· Preparation and maintenance of as-built drawing for the project
· Provide topographic and cross-section surveys as required for planning and placement quantities
· Provide quantity calculations as required
· Ability to manage and integrate data into grade control systems and GPS data collectors
The above statements are intended to describe the general nature and level of work performed by employees assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Duties and responsibilities may be added or changed as deemed appropriate by management at any time.
Skills & Abilities
· Computer proficient and the ability to adapt to new innovations and processes
· Ability to take neat and concise filed notes
· Broad understanding of industry
· Strong written, communication and problem-solving skills
· Ability to maintain discretion and confidentiality at all times
· Good time management and organizational skills
· Demonstrates leadership skills
· Proficient in use of Trimble robots, GSP and Access Software
· RLS, PLS or PE accreditation preferred Education and/or Experience
5 years minimum running a field crew, who can read plans, do field calculations and run Trimble GPS receivers and robotic total stations.
Technical engineering/surveying education and/or construction surveying experience or equivalent combinations of training and related experience
Work Environment/Job Conditions:
This job is performed both in the office and in the field. Field work requires experience and confidence working in and around heavy industrial equipment, systems and conditions is required. Activities and responsibilities require frequent sitting (often working on a computer), frequent driving, flying, walking, standing, light lifting, bending, and reaching. Due to tool and computer usage, there may be repetitive motions of the hands and wrists.
Email Resume to - Kosal.sarou@skanska.com
EEO Statement
Skanska is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity or age.
Job Duties Include but are not limited to:
AAP/EEO Statement
Hercules will take affirmative action to make sure applicants and employees are treated without regard to these characteristics. Hercules is an equal opportunity employer. No employee or applicant for employment will be discriminated against because of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, sex, disability or handicap (provided that the individual is qualified to perform the essential functions of the position with or without reasonable accommodation), age, marital status, veteran’s status, sexual orientation, arrest record, or any other characteristic protected by applicable federal, state, or local laws.
Email Resume to - MDEmployment@herculesfence.com
EEO/AA - Minorities/Females/Veterans/Disability Employer - Females applicants are encouraged to apply.
Thank you for contacting NAWIC Baltimore.
We will get back to you as soon as possible.
Oops, there was an error sending your message.
Please try again later...